There are many factors that could contribute to the damage or malfunction of your overhead door system. And even with a consistent maintenance routine, some commercial doors can fail at the most inconvenient times.That said, it is paramount to contact a professional when your commercial doors start acting up. But for some minor door issues, you can quickly have them rectified while saving costs in the process.
Here are three common commercial door repair needs and how to handle them.
Your Overhead Door is Stuck Closed
A power outage, obstructions in the door track, broken springs, out-of-track rollers, and broken or loose cable are just but a few technical reasons your commercial overhead door might be stuck in the close position. To troubleshoot and probably resolve this problem, simply use the emergency release cord of the door. This cord is the red rope that hangs from the door’s trolley.
Pull the release cord slightly away from the door or down to disengage it from the trolley. Afterward, manually lift the door with both hands until it stays open without support. If the door won’t stay open, you may have to change the springs. If you can’t complete this process, call a garage door specialist in your area to finish the repair.
Garage Door Opener Is Not Working
When you notice that the automatic opener has stopped working, try unlocking the door manually using the keypad located outside or the wall switch on the inside. If any of the manual operations work, then the remote opener might be at fault. You may only need to change the opener or replace its battery with a new one.
If you can’t get your door to open and close automatically after getting a new opener or battery, contact a local locksmith in Philadelphia PA for help. A professional would help you inspect your door system for possible complex problems.
Rid Your Door Strikes of Debris
Dirt and other debris can get into your door strike hole and build up in there. If this happens, the lock won’t latch, thereby making it difficult for the bolt to securely engage. To fix this issue, get a screwdriver and use it to remove the screws holding the strike plate. Then clean out any dirt you can find. Then recouple the door.
Are you Ready to Perform Basic Maintenance Checks on Your Commercial Door?
Remember, you should have the necessary tools, and get appropriate safety attire before performing the DIY maintenance tips in this article.However, property owners without any specialized skills can carry out these simple do-it-yourself repair and troubleshooting tips if they can follow the proper safety practices and procedures. But always entrust complex and delicate door repair jobs to a professional who has years of hands-on experience.
What’s more, because doors are moving systems, try having your commercial doors maintained periodically. Regular tune-ups will help you detect and address most door issues before they get out of hand.
Fortunately, whether for business door maintenance, repairs, or even replacements, you can count on Fast Pro Locksmith to handle a wide range of door and door lock problems. You’ll only need to contact us to find out what we do and how it will benefit you.
Almost every homeowner is going to choose a high security door lock over a regular lock when presented with the choice. But ....Read More
Having beautifully designed sliding door lock is not all there is to protect your property from unauthorized access. This is....Read More
Home and business security can be compromised with only a minor slipup. You may lose your keys or forget to retrieve a set ....Read More
Have you put much thought into panic bars? If so, you might realize they are the handles which run horizontal across doors. ....Read More
Every vehicle has an ignition cylinder. The top portion of a car’s ignition cylinder is visible just to the right of ....Read More